MarkerTape · Products
Choose the right warning products for your project
From non-detectable tape to detectable mesh, choose according to the installation environment, identification method and project specifications.
PE underground warning tape
Identification
High-visibility PE warning material for buried electricity, telecommunications, gas and water lines. Colours, warning messages, dimensions and roll lengths can be customised for the project.
View product ↗
Underground warning mesh
Identification
A physical mesh warning layer covers the utility route to alert excavation crews. Specify width, colour, mesh openings and printing.
View product ↗
Detectable warning tape
Detection
Warning tape with a metallic detection layer assists in locating buried routes with compatible equipment. Construction and detection performance must be confirmed for the selected model.
View product ↗
Aluminium foil detectable tape
Detection
Detectable warning tape with an integrated aluminium foil layer for projects requiring both a visible warning and assistance with metallic detection.
View product ↗
Pipe wrap warning tape
Identification
Warning material for wrapping or marking the outside of pipes, helping identify their purpose during installation and maintenance.
View product ↗
Detectable underground warning mesh
Detection
Combines a mesh warning layer with detectable elements for excavation warnings and route location. The detection method must match the locating equipment.
View product ↗
Two-colour warning mesh
Identification
Contrasting mesh colours improve visual identification on site. Choose colour combinations to suit the utility type, project specifications and printed messages.
View product ↗
Underground utility tracer wire
Detection
Provides a continuous tracing path for non-metallic pipes and utilities. Copper-clad steel, stainless steel or copper conductors can be selected to suit the installation.
View product ↗
Waterproof direct burial connectors
Detection
Waterproof direct burial fittings help maintain electrical continuity in tracer wire systems. Match connector specifications, conductor sizes and installation methods to the system.
View product ↗
Radar-reflective mesh
Detection
Reflective mesh designed to assist ground-penetrating radar identification. Validate signal performance with the actual equipment, soil and installation conditions before use.
View product ↗
HDPE cable protection covers
Protection
Solid HDPE covers provide a mechanical barrier between utilities and backfill. Select the construction according to project risks, cover design and marking requirements.
View product ↗
Detectable warning boards
Protection
Underground warning boards combine rigid protection with a detectable layer. Board dimensions, warning messages and detection-layer construction can be specified.
View product ↗
Plastic safety barrier netting
Site Safety
Lightweight plastic netting for temporary worksite boundaries, warnings and pedestrian guidance. Choose colours, roll lengths, mesh openings and fittings to suit the site.
View product ↗
Underground utility marking flags
Site Safety
Small, highly visible flags on stems or compatible supports mark utility routes, survey points or temporary work boundaries at ground level.
View product ↗
RFID underground smart markers
Smart Marking
RFID electronic markers support underground asset identification and data reading. Confirm frequency, protocol, burial environment and GIS data workflows during project definition.
View product ↗
Cable protection tile warning tape
Protection
Highly visible tape placed above cable covers or protection tiles adds a visual warning below ground. Confirm the printed message and installation layer against the site design.
View product ↗
Pipeline marker posts
Smart Marking
Surface posts or signs identify buried pipeline routes, the conveyed medium or operator details. Text, colour and installation can follow project requirements.
View product ↗
Underground cable protection plates
Protection
Mechanical warning and protection above buried cables. Confirm the cover design, dimensions, colour and markings against engineering requirements.
View product ↗
Wire-reinforced detectable warning mesh
Detection
Warning mesh with integrated tracer wire supports excavation warnings and later route location. Confirm conductor material, termination points and compatible locating equipment.
View product ↗
Wide reinforced warning mesh
Identification
Reinforced mesh for wider utility corridors or special laying widths. Coverage, mesh openings, material and roll length can be specified for the project.
View product ↗
RFID identification cable ties
Smart Marking
RFID cable tie tags associate readable identifiers with cables, pipe fittings or bundled assets. Confirm chip frequency, encoding and reader compatibility together.
View product ↗
PE/TPU layflat tubing
Materials
PE or TPU tubular film for packaging, liners or protective sleeves. Layflat width, thickness, colour and roll length depend on processing and application requirements.
View product ↗
Custom laminated packaging film
Materials
Roll film solutions designed for packaging or lamination requirements. Discuss substrate combinations, printing, thickness, roll width and packaging; food-contact claims require separate validation.
View product ↗
Plastic safety fence
Site Safety
Highly visible plastic mesh for delineating temporary work zones, trench edges and restricted areas. A lightweight roll format makes it practical to deploy, remove and reuse with suitable posts and ties.
View product ↗
Snow fence
Site Safety
Porous plastic fencing for managing wind-blown snow around roads, access routes and exposed sites. A properly positioned fence helps collect drifting snow in a planned area before it reaches the protected route.
View product ↗
Plastic garden fence
Site Safety
Lightweight plastic mesh for defining garden beds, planting areas and small outdoor boundaries. The cut-to-size roll format suits flexible layouts and can be secured to posts, rails or an existing fence.
View product ↗
Plastic hexagonal mesh
Materials
Plastic mesh with a six-sided opening pattern for garden protection, light enclosure and material separation. Its mesh geometry provides a distinct alternative to square or diamond openings when fitting around irregular layouts.
View product ↗
Plastic diamond mesh fencing
Site Safety
Plastic fencing mesh with diamond-shaped openings for temporary site boundaries and outdoor screening. The open structure provides a visible boundary while allowing airflow through the mesh.
View product ↗
Underground cable protection plates
Protection
Rigid polymer cover plates placed above buried cables or ducts to provide a physical separation layer and a visible warning during excavation. Flat or interlocking formats can be reviewed against the trench and project specification.
View product ↗
Red and White Plastic Flags
Site Safety
Contrasting red and white plastic flags for visual identification of temporary boundaries, routes and work areas. Individual flags can be specified for attachment to a line, stake or other agreed support.
View product ↗
Warning flag bunting
Site Safety
A continuous line of repeated plastic pennants for marking work-zone perimeters and temporary restricted areas. Bright colour sequences help make a lightweight boundary line easier to recognise.
View product ↗
Pipeline rock shield mesh
Protection
Flexible plastic cushioning mesh wrapped around a coated pipe to separate the coating from coarse backfill and incidental contact. Its open structure can be evaluated with the pipeline coating and construction method.
View product ↗
Cable duct spacers
Protection
Moulded support spacers for arranging multiple ducts at a consistent separation in a specified duct-bank layout. A suitable spacer system helps maintain duct alignment while the assembly is prepared and backfilled or encased.
View product ↗
Pipe end caps
Protection
Temporary end covers for keeping debris out of pipes and ducts during storage, transport and construction. Push-fit or other retention styles can be reviewed against the pipe dimensions and required handling conditions.
View product ↗
Cable pulling rope
Materials
Rope for installing a draw line or pulling cables through suitable ducts as part of an engineered cable installation plan. Diameter, construction and working load are selected for the intended pulling operation.
View product ↗
Tracer wire test station
Utility Locating
Accessible terminals for connecting compatible locating equipment and checking installed tracer-wire continuity.
View product ↗
Underground electronic marker
Utility Locating
Passive marker options for identifying utility junctions, bends and other key points using a compatible locator.
View product ↗
Underground utility locator and transmitter kit
Utility Locating
Project sourcing and selection of compatible equipment for tracing conductive utilities or installed tracer wire.
View product ↗
Electronic marker locator / reader
Utility Locating
Equipment selection for locating compatible buried RF markers; identification reading and writing depend on the model.
View product ↗
Pipeline locating sonde
Utility Locating
A compatible transmitting sonde can be introduced into an accessible duct or pipe for point locating during inspection.
View product ↗
Detectable duct rod
Utility Locating
Duct-rodding options for conduit installation and route locating, with detection construction confirmed for the intended method.
View product ↗
S-Wave Stainless-Steel Wire Warning Tape
Warning Tapes
Continuous S-wave conductors laminated to printed warning tape. Specify material, count, grade, diameter, wave geometry and tape dimensions for your project.
View product ↗
S-Wave Copper-Wire Detectable Warning Tape
Warning Tapes
Continuous S-wave conductors laminated to printed warning tape. Specify material, count, grade, diameter, wave geometry and tape dimensions for your project.
View product ↗Standards and testing: this page does not certify any product. Contact us to confirm the specific model, applicable standards and available test documents.